Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level best seller

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level Reviews

I was skeptical of this mount. Why should this be so cheap compared to other mounting kits? I ordered one (due to the price), and prepared to return it if I did not think the mount could handle the weight of the 52" LCD TV (Samsung). Once I got it, I understood the cost. Good low-cost design and built with solid heavy duty steel. - Two horizontal bars are load-bearing, and for proper VESA spacing, they have to be parallel and relative distance must be in the right tolerances. These are made of solid steel. - Two vertical bars (in the wall mount) are flimsey, and that's ok. it should be solid enough make a rectangle box w/ square angles. That's it. - Two vertical mounting (to the TV) brackets are of heavy duty metal. Making this in to two parts (not one), reduction of material, but also allows free horizontal adjustment on the TV mount. - By doing the above, the kit is small, uses less metal (and reduce shipping and material waste). Positives --------- 1. Good solid and heavy duty construction. 2. Good value (low-cost). Paid less than $ 25 including shipping. 3. Easy install. Took 15 min to figure out the instruction (which is not totally clear), and 10~15 min to install and ready to watch. 4. built-in level worked well during marking of mouting holes on the wall --I tested w/ my own, and was consistent. 5. Once the mounted on the wall, and bracket on TV, you could adjust horizontal TV placement on the mount, just by sliding few inches left or right, post install. I expect this to be safe and true if the wall mount is directly screwed into the wall studs. I do not expect dry-wall install without the use of the studs to handle such adjustment. 6. The brackets on TV could also be used to adjust vertical TV placement by a few inches up and down. But for this one, you'll need to lift TV off the bracket and adjust and pull back :-). 7. There is a reasonable space (I would say, just right) from the wall to the TV to get cables/connectors through WITHOUT using any expensive 90 degree connectors. Plenty of space between two horizontal bars to put extra power outlet and data HDMI cable outlet to hide all the cables. 8. This supports tilt up/down, and works well. Amazon product description does not make it clear. Negatives --------- 1. Just one. Clearer instruction so that I do not need to spend 15 min figuring things out. One could learn a lot form IKEA :-). 2. Packing/Packaging -- Not necessarily Cheetah Mount issue -- mine came w/o missing parts, although I noticed torn cardboard box edges and some parts COULD have been lost during shipping. Either double box, or have Cheetah use heavier box stock. Helpful Hints & Comments ------------------------- 1. DO NOT forget to tighten the screws (2) on the bottom horizontal bars AFTER TV is placed on the wall mount -- especially if you are in CA w/ quake. This is what prevents TV falling off the mount accidentally. But do not over-tighten (you are NOT securing from left-to-right movement). 2. Very happy w/ my purchase. Will get one more for my other TV.. this is my Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level reviews

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level Specs

• Hole Pattern Coverage up to 700x400mm (27.6x15.8") Including VESA 100x100, 200x100, 200x200, 300X300, 400x400, and 600X400
• Stronger (Dual Hook) with Less Metal GREEN Design Supports 165lbs with Less Than 6lbs of Steel
• All Mount Pieces Are Made From 100% Cold Rolled High Grade Steel
• Flush Position is Only 1.3" From the Wall Yet Mount Tilts Up To 15 Degrees
• Included 10' Braided Cable Supports 1080P, 3D, Ethernet, and Audio Return conforming to Lastest HDMI 1.4 Standard

. Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level Best buy

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level
. Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level will.. (Read More)

Cheetah Mounts APTMM2B Flush Tilt Dual Hook (1.3" from wall) Flat Screen TV Wall Mount Bracket for 32-65 inch Plasma, LED, and LCD TVs Up To VESA 700x400 and 165lbs, Including 10' Braided High Speed with Ethernet HDMI Cable and 3-Axis Magnetic Bubble Level,

9 out of 10 based on 53 ratings